SOURCING GUIDE

How many pedestal fans fit in a 40ft container?

Compare reference carton sizes and estimated loading quantities for AIRSMOOT fans, then prepare a model-by-model loading review. The 40-foot figures on this page refer to 40HQ containers, not standard-height 40GP containers.

Quick answer by model

ModelTypeSizeCartonUnits / cartonm³ / unit20GP40HQ
FS013-in-1 pedestal / wall / floor16 / 18 inch62 × 17.5 × 50.5 cm20.02741,0002,500
FS03Remote control pedestal16 / 18 inch51 × 15 × 51 cm10.03906001,550
FS02Industrial pedestal20 inch72 × 21 × 72 cm10.1089252500
FS04Industrial floor12 inch32 × 32 × 16 cm10.01641,7004,050
FS05Tower fan86 cm height18 × 15 × 86 cm10.02321,1202,750
FS06Misting pedestal16 inch60 × 25.5 × 46 cm10.0704340680

Figures are planning references for the stated size and confirmed with the order. FS02, FS04 and FS06 are shown in their reference size only; other sizes need separate packing data.

Why the number changes so much between models

Two fans that look similar can differ by a factor of five in container quantity. What changes is the carton, not the fan. A 12-inch floor fan packs into a 0.016 m³ carton; a 20-inch industrial pedestal fan needs 0.109 m³ — nearly seven times the space for one unit.

Carton volume is an important planning input, but confirm gross carton weights, stacking limits and container payload as well. The FS03 reference gross weight is 3 kg per unit; other models and sizes may differ. A volume calculation alone does not establish a safe loading plan.

The formula, worked through

Theoretical units = floor(planning volume ÷ carton volume) × units per carton; verify with an actual loading plan

FS03: 51 × 15 × 51 cm = 0.039 m³ per carton, 1 unit per carton Illustrative planning assumption: 27 m³ ÷ 0.039015 = about 692 cartons before layout checks Quoted loading: 600 units — the actual arrangement must be checked for stacking and door clearance

Run the same calculation for FS01, which packs two units per carton: 0.62 × 0.175 × 0.505 m = 0.0548 m³ per carton, so 0.0274 m³ per unit. That is why FS01 loads 1,000 units in a 20GP while FS03 loads 600 despite both being 16/18-inch pedestal fans — dividing the carton volume across two units lowers the volume per fan compared with the FS03 reference.

20GP, 40GP or 40HQ

A 40HQ is taller than a standard-height 40GP, so their loading quantities are not interchangeable. Choose the container type using the confirmed order volume, gross weight, packing layout and freight quotation. Ask your forwarder for internal dimensions and payload limits for the actual equipment.

Compare LCL and full-container quotations with all origin and destination charges. There is no universal volume threshold at which one method is cheaper.

Planning a mixed order

Convert every line to cubic metres first, then add them up:

300 × FS03 (0.039015 m³) = 11.70 m³ 400 × FS05 (0.02322 m³) = 9.29 m³ 200 × FS04 (0.016384 m³) = 3.28 m³ Total ≈ 24.27 m³ of cartons → request a layout, weight and freight review

Two practical notes. First, allow for unused space from carton dimensions, stacking and door clearance; no fixed percentage guarantees that a model mix will fit. Second, decide early whether the load ships floor-loaded or palletised. Pallets make warehouse handling easier at destination but remove volume — a pallet footprint can cost several cartons per stack.

What changes the number after you order

Custom colour boxes, added accessories, a longer power cord packed separately, or a manual in a second language can all change carton dimensions. Any of those changes the carton volume and therefore the loading figure. Send the packaging requirement before the order is fixed, so the quotation and the packing list describe the same carton.

Confirm tariff classification and duties with your customs broker using the exact fan type, power and destination market. Do not assume the same tariff code applies to every model.

Need the loading figure for your mix?

Send the model, size and quantity per line. We will return the carton data, loading estimate and price for that combination.

Request a Quote

Related pages

Container loading questions

How many 16-inch pedestal fans fit in a 40ft container?

For FS03 in its shared 16/18-inch carton, an estimated 1,550 units load into a 40HQ and 600 into a 20GP. Each carton holds one unit at 51 × 15 × 51 cm. Confirm the figure on the packing list attached to your quotation.

Should a first order use a 20GP or a 40HQ?

It depends on the quantity per model. A 20GP or 40HQ may suit different quantities and model mixes; freight cost per unit depends on the route, load and current forwarder quotation. For FS03, the published 20GP reference is about 600 units. Compare a forwarder’s LCL and full-container quotations, including origin and destination charges, before choosing a shipping method.

Can several models share one container?

Yes. Plan a mixed load by cubic metres rather than by unit count: multiply the cartons per model by the carton volume, add the totals, and compare against usable container space. Keep a buffer for load efficiency.

Does custom packaging reduce the quantity per container?

It can. A colour box or added accessories change carton dimensions and sometimes stacking height, which changes carton CBM. Send the packaging requirement before the order is fixed so the loading estimate reflects the final carton.

Are the figures weight-limited or volume-limited?

Check both volume and weight. FS03 has a reference gross weight of 3 kg per unit, but other models differ. Confirm gross carton weights, container payload and stacking limits alongside carton size.

WhatsAppChat with SalesRequest a Quote